Compressed Air Dryers

Elgi offers a reliable solution through Elgi Airmate Refrigerant Air Dryers. The dryers ensure longer life of compressed air systems through efficient removal of the condensate and contaminants.

ELGi’s Energy Saving Cycling Refrigerated Air Dryer eliminates the moisture and hence is an ideal accessory that can be used for a wide range of applications. It comes with an industry-leading warranty

HeatSink™ Cycling Refrigerated Dryers incorporate ZEKS True-Cycling™ operation that automatically cycles the dryer refrigeration system on and off in response to variations in compressed air demand.

NC Series™ Non-Cycling Refrigerated Compressed Air Dryers provide excellent compressed air drying performance in a compact, straight-forward design.

MPS Hydronix™ Heatless Purge Dryers remove moisture from compressed air to achieve dew points from -40°F to as low as -100°F.

ZPB Eclipse™ Heatless Purge Dryers remove moisture from compressed air to achieve dew points from -40°F to as low as -100°F.

ZHA Eclipse™ Heated Purge Dryers remove moisture from compressed air to achieve dew points from -40°F to as low as -100°F.

ZBA Eclipse™ Blower Purge Dryers remove moisture from compressed air to achieve dew points to -40°F. ZBA Series dryers utilize desiccant media in a twin-tower design and a process of heated desiccant regeneration delivered from an on-board blower to make available very dry air for critical applications.

HTB Hi-Temp Non-Cycling Refrigerated Compressed Air Dryers are engineered specifically for use with reciprocating compressors which typically discharge air at temperatures above 120°F.

SCFX and SS Series Refrigerated Dryers are engineered specifically for use in compressed air systems that operate at pressures greater than 200 psig.

The Aircel Programmable Controller and Energy Management System is standard on the new Aircel ABP Series.

The Aircel AEHD Series Dryers utilize process air for regeneration of the desiccant bed similar to the heatless designs. These dryers are typically referred to as “heatless” or “heated”.

The Aircel AHLD E-Series is a fully automatic Dual Tower Heatless Regenerative Compressed Air Dryer with an integrated Energy Management Purge Reduction System.

The Aircel VF Series (10 - 1,200 scfm) offers the highest efficiencies at varying flow conditions in a lightweight, compact design. No other dryer in the industry can offer the efficiency ratings achieved by the VF Series dryers in variable flow operation.

The Aircel DHT Series (20 - 125 scfm) high inlet temperature refrigerated compressed air dryers are designed for air-cooled reciprocating type air compressors, these dryers can accept compressed air up to 205°F and provide clean dry air at the outlet.

The Aircel Programmable Controller (APC) provides complete control of the system with text description of each step in the sequence of operation, these BHD Series achieves a unique seven stage purification process.

The unique dry thermal mass in the nano NXC cycling refrigerated air dryer saves energy and money by utilizing dual transfer technology (DTT).

The nano R2 range of RNC high temperature direct expansion refrigerated air dryers are specifically designed for the unique demands of high temperature compressed air applications.

The nano R2 range of RTC high temperature refrigerated air dryers are specifically designed for the unique demands of high temperature compressed air applications.

The nano R3 range of CPD high capacity process cycling refrigerated dryers are specifically designed for the unique demands of high air flows and high heat load compressed air applications.

nano NDX direct expansion refrigerated air dryers allow customers running a consistent volume of compressed air the ability to achieve excellent dew point performance and save energy.

Clean and dry compressed air is easily achieved with the nano ultra-high purity desiccant air dryers.

Clean and dry compressed air is easily achieved with the nano D3 ultra-high purity compressed air dryers.

The nano D4 compact high-pressure twin tower desiccant air dryers are designed to remove water vapor from your high pressure compressed air system, lowering the pressure dewpoint to -40°F.

The nano D4 high pressure twin tower desiccant air dryers are designed to remove water vapor from your high pressure compressed air system, lowering the pressure dewpoint to -40°F.

The nano D5 NBP blower purge twin tower desiccant air dryers are designed to remove water vapor from your compressed air lowering the pressure dewpoint to -40°F.

The nano D5 NEX externally heated twin tower desiccant air dryers are designed to remove water vapor from your compressed air lowering the pressure dewpoint to -40°F.

The nano D5 NHL heatless twin tower desiccant air dryers are designed to remove water vapor from your compressed air, lowering the pressure dewpoint to -40 or even -100°F.

nano L1 range of lab gas CO2 free dryers provide clean, dry, CO2 free purge gas for your laboratory at a fraction of the cost of traditional cylinders. Why buy purge gas in a high-pressure cylinder when you can generate your own, more easily, reliably and cost effectively using a CO2 dryer?